Smith’s Micro PCG is a 3-Component, Fast Setting, Aliphatic Polyurethane Cementitious product for use as a pit grout in conjunction with concrete polishing as well as repairs of chips, gouges, and other surface defects in concrete surfaces prior to a resinous floor coatings or decorative concrete systems. Smith’s PCG applies from a feather edge (0”) to 4” neat in a single lift . Sold as a natural cement grey but may be tinted with Smith’s ISC Industrial Solid Color Packs (white is not attainable with Smith’s Micro PCG). Once diamond ground, Smith’s Micro PCG will accept topical stains, dyes and densifier product for decorative concrete and polished concrete applications.
RECOMMENDED USES:
- Skim-coating Chips, Gouges, Spalls, Pop-outs, Voids & Cracks (static, non-moving)
- Apply Feather Edge (0”) to 4” neat (Any depth w/ aggregate extension)
- Pit Grouting Polished Concrete
Bonds to:
- Concrete & Polymer Modified Overlays
- Terrazzo (once fully stripped of wax)
- Wood Subfloors (underlayment grade plywood or OSB prior to resinous floor coatings only)
HIGHLIGHTS:
- Fast Return-to-Service
- Diamond Grind = Typically 60 to 90 min. @ 72°F / 50% Humidity
- Accepts subsequent layer once hard set
- Accepts Heavy Forklift Traffic in a 8 to 12 hours
- U.V. Light Resistant
- Natural Cement Gray – tint with Smith’s ISC Color Packs for additional colors
- Durable
- Good Impact Resistance
- Abrasion Resistant
- Accepts heavy traffic, such as pallet jacks and forklifts
- Tenacious Bond to a variety of substrates
- Self-Priming over most substrates
- High Solids Content – Low VOC’s
- Performs well in areas of regular water exposure or submersion
- Accepts Stains, Dyes, Densifier & Coatings after diamond grinding
