Smith’s Polyaspartic 7000LO
Smith’s Polyaspartic 7000LO is a low odor, solvent-based, low viscosity, high-performance, 2-component, fast cure, 76% solids Aliphatic Polyaspartic coating with a gloss finish which yields a resilient, U.V. Stable & abrasion resistant film for application to a variety of substrates including, but not limited to concrete, wood or metal as a primer or in conjunction with a variety of coatings systems to include epoxy-based, cementitious urethanes, broadcast systems such as Vinyl Chip, Quartz, etc.
Smith’s Polyaspartic 7000LO was developed for ease of use with a 1 to 1 mix ratio plus a longer working time than most competitors Polyaspartic products as well as minimal odor during application.
Smith’s Polyaspartic 7000LO is an excellent coating for Vinyl Chip, Color Quartz, broadcast solid color shop floors & pigmented system applications for residential, retail, commercial or industrial environments which demand color stability, faster return-to-service & durability.
For solid colors, Smith’s Polyaspartic 7000LO accepts Smith’s ISC Color Packs.
RECOMMENDED USES:
- Fast Return-to-Service Applications
- Food & Beverage Floors
- Forklift traffic areas
- Manufacturing Areas & Aisleways
- Decorative Concrete Systems & Stains
- Loading Docks
- Institutional, Retail, Commercial & Residential Environments
- Schools & Universities
- Pharmaceutical Floors
HIGHLIGHTS
- Very Low Odor & Less than 249 g/L VOCs
- Fast Cure
- Recoat within a few hours
- Capable of up to 15 mils per coat without foaming
- Highly Durable
- Easy to Clean
- Hot Tire Pickup Resistant
- Aliphatic – Non-Yellowing
- Suitable for Interior & Exterior Use
- Hot Liquid Spill Tolerant up to 300°F (148.8°C) or 250°F (121.1°C) for extended exposure when applied over a thermal shock-resistant coating system, such as Smith’s CPR
- Non-Tainting for areas at risk of food flavor contamination
- Meets FDA & USDA flooring requirements (indirect food contact)
HIGHLIGHTS:
- For Interior & Exterior Use
- 1 to 1 Mix Ratio – Easy to Mix & Apply
- Durable
- Chemical & Stain Resistant
- Hot Tire Pickup Resistant
- Easy to Clean
- Good Pot-life with fast turnaround – Fast Cure
- U.V. Light Stable
- Apply up to 15 mils WFT in a single lift
- Meets FDA standards for flooring
- Solvent-based yet Low VOC’s & No Red Label
- Less than 2 g/L
- Meets Source Specific Standards Rule 1113 established by AQMD in California
- Liquid does not sustain combustion per ASTM D4206
- Not Regulated as HAZMAT per:
- 49 CFR 173.120 (a) (3)
- ADR 2.2.3.1.1. NOTE 1
- IMDG 2.3.1.3 (1)
- ICAO/IATA 3.3.1.3 (a)
