Smith’s Polyaspartic 4000 is a low odor, high solids, 2-Component, aliphatic polyaspartic with a gloss finish and a 30 minute pot-life.  Smith’s Polyaspartic 4000 is a high performance coating that yields a UV stable, hard, resilient and abrasion resistant film with good splash and chemical spill properties.  Smith’s Polyaspartic 4000 serves as an excellent system for Vinyl Chip and Color Quartz systems as well as a pigmented grout coat for commercial and industrial installations over other resinous coating systems, such as Cementitious Polyurethane Resurfacers in food processing/production environments, etc. where low odor, good chemical resistance, durability and color stability is required.

RECOMMENDED USES:

• Food & Beverage Floors
• Institutional, Retail, Commercial & Residential Environments
• Schools & Universities
• Pharmaceutical Floors

HIGHLIGHTS

• May be applied up to 20 mils per lift
• For Interior & Exterior Use
• Overnight return to service – Forklift traffic after 24 – 36 hours
• Low VOC’s – Less than 50 g/L
  • Meets Source Specific Standards Rule 1113 established by AQMD in California
• Highly Durable
• Good Working Time
• Easy to clean
• Resistant to Hot Tire Pickup
• Incidental Hot Liquid Spill Tolerant to 230°F (121°C) when applied over a thermal shock resistant coating system, such as Smith’s CPR or similar
• Meets FDA/CFSAN U.S. Food Code – Physical Facilities 6-101.11 Surface Characteristics. Not tested for CFR 21 Direct food contact