Epoxy MAC125 – Fast Cure Moisture Remediation & Oil Stop Epoxy Primer

Smith’s Epoxy MAC125 is a Fast Curing 100% Solids Epoxy primer used for:

Moisture Vapor Suppression up to 25 lbs. / 100% RH / 14 pH
Oil Stop Primer over concrete after treating with Smith’s Oil Clean
Direct adhesion to a variety of substrates, including but not limited to concrete, properly prepared, well bonded and solid Ceramic/Porcelain/Quarry Tiles, and metal substrates (i.e. Aluminum, Copper, Steel, Zinc, etc.)

Smith’s Epoxy MAC125 is an excellent choice in all common industrial, commercial and residential environments as a primer prior to application of:

DOCUMENTS:

RECOMMENDED USES:

Treats New or Existing Concrete
Up to 100% Relative Humidity (ASTM F2170)
Up to 25 lbs. (ASTM F1869)
As a primer for:
- Resinous Floor Coating Systems
- Terrazzo
- Resilient Floor Coverings
- Ceramic Tile
- Decorative Concrete Overlay systems
- Oil Stop Primer over oil contaminated concrete (in conjunction with mechanical preparation & Smith’s Oil Clean)
Bonds to:
- Concrete
- Metal (Steel, Copper, Aluminum, Zinc)
- Ceramic / Quarry / Porcelain Tile

HIGHLIGHTS:

Exceeds ASTM-F3010-13 requirements
- All 3 recommended application thicknesses pass at <0.1 gram perm
- Permanence *0.014 grams / 24h*m² * mmHg @ 23 mils DFT (2 coat neat system)
Remediates High pH levels
Acts as a vapor barrier to allow the installation of moisture sensitive floor coverings and floor coating systems
Overnight return to service – Allows for subsequent layers to be applied in 1 to 2 hours
Allows same day recoating
Ideal for cool installation temperatures
Solvent and Water free
Low Odor and VOC’s – Available in all regions