Polyaspartic – 1 Day Garage

Preparation & Repairs

Primer

Broadcast Vinyl Chip

Remove loose chips

Seal

Smith Paint Products’ goal was to develop Polyaspartics that were easier to apply compared to the short working times of our competitors first generation polyaspartics as well as other short pot-life systems on the market.

Polyaspartic systems are ideal coatings for quick return to service. Available in 30 or 45 minute pot-life (working time) formulas, Smith’s Polyaspartic series achieve a resilient, abrasion and general chemical resistant film. Fast turnaround, UV stability and film clarity allows Smith’s Polyaspartic to be applied as a primer, color body coat, grout coat and/or top coat for Vinyl Chip, single broadcast Shop Floors, Color Quartz, Metallic & Luster and pigmented thin-mil floor systems.

Smith Paint Products offers 4 different series of Polyaspartics:

1000 Series – Roller Grade Formula
- 1:1 mix Ratio with 30 minute working time (72°F/40% Humidity)
- Fast Cure – Recoat in 2 to 3 hours (72°F/40% Humidity)
- Apply up to 15 mils per lift
2000 Series – Roller Grade Formula
- 1:1 mix Ratio with 45 minute working time (72°F/40% Humidity)
- Long working time – Recoat in 4 to 5 hours (72°F/40% Humidity)
- Apply up to 15 mils per lift
3000 Series – Spray Grade Formula
- 1:1 mix Ratio with 30 minute working time (72°F/40% Humidity)
- Specifically developed for HVLP spray applications
  - Low Sheen – Polyaspartic 3550
  - Gloss Finish – Polyaspartic 3000
5000_LO Series – Roller Grade Low Odor Higher Build Formula
- 2:1 mix Ratio with 20 to 25 minute working time (72°F/40% Humidity)
- Recoat in 8 to 14 hours depending on thickness (72°F/40% Humidity)
- Apply up to 20 mils per lift
- Non-tainting – acceptable for use in odor sensitive environments such as bakeries, restaurant kitchens, etc.