Smith’s Epoxy UCE201 is a decorative 100% solids epoxy used for the body coat of metallic epoxy or mixed with color Quartz aggregate as a mortar for Smith’s Epoxy HDQ-100™ decorative epoxy mortar system. This epoxy yields extended healing & flow properties when used as the epoxy body coat for Smith’s Metallic & Luster™ system to deliver optimal mottling aesthetics superior to traditional epoxy products while offering high clarity & an extended flow time on the floor. Conveniently packaged in either a 3 gallon kit with space in the Part A container for mixing all necessary components in the pail or in larger kits.

Smith’s Epoxy UCE201 is sold as a clear which accepts Smith’s Epoxy U.V. Absorber additive (OPTIONAL – sold separately) to enhance the durability & to extend the service life of the epoxy film by absorbing UVA radiation thus lessening U.V. light degradation (i.e. Yellowing, Chalking, Cracking, etc.).

Metallic body coats can be achieved by adding Smith’s Metallic & Luster (sold separately) to the Part A prior to mixing with Part B for unique metallic epoxy floors. Smith’s Epoxy UCE201 self-heals for up to 60 minutes at 72°F, making it ideal for Metallic & Luster coatings to achieve optimal mottling & a smooth finish for one-of-a-kind floors.

Solid colors can be achieved with the addition of Smith’s ISC™ Industrial Solid Color Packs (sold separately), allowing the contractor the ability to reduce waste by only pigmenting what is needed for the individual project.

RECOMMENDED USES:

• Residential, Retail & Light Commercial applications

• Matrix for Smith’s Metallic & Luster system body coat

• Matrix for Decorative Color Quartz Epoxy Mortar or Grout Coat for Smith’s Epoxy HDQ-100 system

HIGHLIGHTS:

• High Clarity & Color Enhancement 
  • Great Mottling & Veining Effects
  • Good Metallic Color Contrast
  • Improved Metallic Powder Wetting
    • Less prone to Metallic Comet Tails vs. competitor products when mixed properly
• Convenient packaging – mix entire kit in the Part A pail (3 gallon kits only)
• Superior Flow & Leveling Characteristics vs. traditional multipurpose 100% solids epoxy floor coatings
  • Great Working Time – Self-heals for up to 60 minutes at 72°F
    • Pour multiple colors then spread after 30 to 60 minutes to create desired appearance without creating cleat prints
    • Optimal mottling created between 30 to 50 mils but 
  • No Torching Necessary to break surface tension with metallic body coats
• Low Odor & Low VOC 
  • Complies with VOC regulations for industrial maintenance coatings in SCAQMD