Smith’s Epoxy VCB^46P is a pigmented, 2-component, low odor, low VOC, fast-curing waterborne epoxy used specifically as a base coat for full broadcast Vinyl Chip systems in residential, retail & commercial environments. 

Smith’s Epoxy VCB^46P achieves a tenacious bond at all recommended application temperatures & cures quickly, allowing for the excess, loose chips to be removed within a few hours with subsequent layers immediately following. 

Unlike other products used for a similar purpose, the working time & pot-life of Smith’s Epoxy VCB^46P doesn’t vary much between cool to warm temperature installations within the recommended application temperature range allowing for a more consistent installation with optimal adhesion, less waiting at cool temperatures & less rushing at warm temperatures. 

Also for use as an alkalinity & moisture vapor reduction primer with readings <5% MC / <15 lbs. / <90% RH with between 9 to 12 pH when applied at a minimum of 10 mils up to 20 mils WFT over properly mechanically prepared concrete, to include solid color or full broadcast vinyl chip systems broadcast directly into the Smith’s Epoxy VCB^46P primer.  

RECOMMENDED USES:

• As a Base Coat for Full Broadcast Vinyl Chip over properly prepared, sound & solid:
  • Concrete & Lightweight Concrete
  • Wood (APA Exterior or Marine grade after priming with Smith’s Epoxy FW38)
  • Appropriate for Light Commercial & Residential Interior Full Broadcast Vinyl Chip floors
• As a primer as part of a residential, retail or commercial coating system to include moisture vapor transmission & alkalinity reduction within the published tolerances in the product data sheet

HIGHLIGHTS:

• Easy to Apply
• High moisture & alkalinity tolerance
• Fast Cure – remove loose Vinyl Chip within a few hours
  • May be used as part of One Day installation system
• Soap & Water Clean-up while wet
• Colors available:
  • 5500 White
  • 5510 Boulder
  • 6515 Grayhawk
  • 5585 Medium Gray
• Low Odor & VOC’s – Available in all regions