2200 Paxton Street
Harrisburg, PA 17111-1038
Office: 717.233.8781 or
Toll Free: 800.466.8781 (US)
Facsimile: 717.232.5199

Smith Paint Products®

2200 Paxton Street
Harrisburg, PA 17111-1038
Office: 717.233.8781
Toll Free: 800.466.8781 (US)
Facsimile: 717.232.5199

Search
Close this search box.

CPR-MD – Flowable Rake & Trowel Moderate-Duty Urethane Cement

Smith’s CPR-MD is a 3-component, flowable, rake and trowel consistency Cementitious Polyurethane Mortar used to resurface and protect floors susceptible to Thermal Shock and water erosion in moderate traffic environments.  Smith’s CPR-MD works well in damp conditions and on floors with slightly elevated moisture emission levels up to 85% Relative Humidity per ASTM F2170 and up to 10 lbs. per ASTM F1869.

Smith’s CPR-MD can be applied neat, with a topcoat such as Smith’s Hi-Wear 90S, Smith’s CRU’86 or Smith’s Poly-WB directly to its surface within the recoat window without the need for addition preparation as long as the CPR surface remains uncontaminated or broadcast with Quartz or Vinyl Chip prior to a grout coat of Smith’s Polyaspartic 1000, Smith’s Polyaspartic 2000, Smith’s Polyaspartic 5000LO, Smith’s Epoxy GEL-150 (for orange peel texture), Smith’s Epoxy FC125 or Smith’s Epoxy U100.

Sold as a natural Beige.  Other colors possible with the addition of Smith’s Dry Pigment color packs (sold separately).

RECOMMENDED USES:

  • To resurface eroded concrete floor from 3/16” to 1/2” per lift
  • Food Related areas to include:
    • Bakery Proofers
    • Breweries and Distilleries
    • Chillers/Freezers *(Once cured)
    • Dairy Processing
    • Meat Processing
    • Commercial Kitchens and Restaurants
    • Grocery and Foodservice
  • Pharmaceutical Plants
  • Morgues
  • Automotive Service Bays
  • Vivarium’s
  • Wet areas
    • Car Washes
    • Wash down bays

HIGHLIGHTS:

  • Moderate Duty Traffic to include castor and forklift traffic (even without a Quartz Broadcast)
  • Performs well in continually damp conditions, such as wash down bays, paper plants, food & beverage production floors, car washes and much more
  • Acceptable for use in USDA/FDA/CFIA regulated facilities
    • Non-Tainting – low odor for areas at risk of food flavor contamination
  • VOC Compliant in all regions
    • California 01350 Air Quality Compliant
  • LEED Compliant – Contains Rapidly Renewable Raw Materials
  • Thermal Shock Resistant – For Service Temperatures between -100°F to 230°F
  • Easy to clean
  • Does not Harbor Bacteria nor Fungi Growth
    • Castor Oil-based – Good Antibacterial Properties
  • Interior and Exterior Applications
  • High Chemical resistance
  • High Durability
  • Fluid consistency for gauge rake and trowel finishing
  • Phthalate (BPA) Free