Facebook Instagram Linkedin
Facebook Instagram Linkedin


2200 Paxton Street
Harrisburg, PA 17111-1038
Office: 717.233.8781 or
Toll Free: 800.466.8781 (US)
Facsimile: 717.232.5199

Since 1929

Smith Paint Products®

2200 Paxton Street
Harrisburg, PA 17111-1038
Office: 717.233.8781
Toll Free: 800.466.8781 (US)
Facsimile: 717.232.5199

Home

Smith’s CPR-HD is a 3-component, trowel applied Cementitious Polyurethane Mortar used to resurface and protect floors susceptible to thermal shock and water erosion in heavy castor, forklift and pallet jack traffic environments.  It’s trowel grade consistency is ideal for sloping to drains as well as resurfacing large eroded floor areas.  Withstands thermal shock of -330°F (Liquid Nitrogen) to 250°F (Steam), both from spills to constant exposure.

Smith’s CPR-HD may be used as a stand-alone, functional wear surface as well as a base for a Quartz broadcast in conjunction with Smith’s Polyaspartic products as the grout coat or topcoated with a durable Polyurethane, such as Smith’s Poly-WB or Smith’s Hi-Wear 90S.

Smith’s CPR-HD works well in damp conditions and on floors with slightly elevated moisture emission levels up to 85% Relative Humidity and up to 15 lbs., to include but not limited to 7 to 10 day old fresh concrete. 

RECOMMENDED USES:

  • Resurface eroded concrete floors at 1/4” (6.35 mm) to 1/2” (12.7 mm) per lift
  • Food Related areas to include:
    • Bakery Proofers
    • Breweries and Distilleries
    • Chillers/Freezers *(Once cured)
    • Dairy Processing
    • Meat Processing
    • Commercial Kitchens and Restaurants
    • Grocery and Foodservice
  • Pharmaceutical Plants
  • Morgues
  • Automotive Service Bays
  • Vivarium’s
  • Wet areas
    • Car Washes
    • Wash down bays

Highlights

  • CPR-HD offers a greater ROI with easier maintenance vs. Tile
  • Heavy Duty Traffic to include castor and forklift traffic
  • Non-Tainting for areas at risk of food flavor contamination or sensitive to solvent odors
  • VOC Compliant in all regions
    • California 01350 Air Quality Compliant
  • LEED Compliant – Contains Rapidly Renewable Raw Materials
  • Thermal Shock Resistant – For exposure temperatures between -330°F (Liquid Nitrogen) to 250°F (Steam)
  • Easy to clean
  • May be applied to new concrete after 7-10 day cure once mechanically prepared and capable of achieving a min. tensile bond strength of 218 psi (1.5 MPa)
  • Does Not Harbor Bacteria Growth
  • Interior and Exterior Applications
  • High Chemical resistance
  • Trowel Consistency – Ideal for sloping to drains
  • Phthalate (BPA) Free

Documents: